金币
UID468223
帖子
主题
积分2022
注册时间2019-7-9
最后登录1970-1-1
听众
性别保密
|
发表于 2021-4-16 16:31:04
|
显示全部楼层
本帖最后由 光风霁月 于 2021-4-16 17:15 编辑
你可以看看USP<1116>,论坛里面可以找到USP35-1116,在Selection of Culture Conditions
Time and incubation temperatures are set once the appropriate media have been selected. Typically, for general microbiological growth media such as SCDM, incubation temperatures in the ranges of approximately 20℃–35℃ have been used with an incubation time of not less than 72 hours. Longer incubation time may be considered when contaminants are known to be slow growing. The temperature ranges given above are by no means absolute. Mesophilic bacteria and moldcommon to the typical facility environment are generally capable of growing over a wide range of temperatures. For many mesophilic organisms, recovery is possible over a range of approximately 20℃. In the absence of confirmatory evidence, microbiologists may incubate a single plate at both a low and a higher temperature. Incubating at the lower temperature first may compromise the recovery of Gram-positive cocci that are important because they are often associated with humans.
|
|